The standard design is equipped with Analog Tach feedback, for Closed Loop Velocity Servo Applications. The unit can also be driven in the “Current Mode” for non-velocity applications. Other features include Peak and RMS Current Limiting adjustments, and Inputs for the Command, Tacho, Limit switch enable/disable, an inhibit line, Current Monitoring pin, and a fault line, plus several common pins. The unit is further equipped with a Green “Run” LED, and three fault detect LEDS, for “over-voltage” , “RMS Over-Temp” and a “Surge/Ground Fault” LED. The input Power and Motor Connections are completed with a heavy-duty screw down terminal block. All Interconnect and Operational details are covered in the 15 Page Instruction Manual offered by the Company.
Samples are available FROM STOCK for rapid prototyping needs. The Company also supplies Servo Motors and Gearmotors, with and without Analog Tachs, to complete the Servo System. See the Comprehensive list of Finished Products on hand at http://www.midwestmotion.com/inventory.pdf ..
The company offers a variety of standard ancillary equipment including DC Linear Actuators, AC → DC Power Supplies, DC servomotors and gear-motors. Typical applications include Battery Operated (24-96V) Robotic Vehicles & E.V. drives, Medical, Mobility / Accessibility products, Robotics & Automation including Unmanned Guided Vehicles, Weapons Guidance Systems, Semiconductor Processing Equipment, Actuators, Packaging & Labeling Machines, Metalworking Machines, and many other applications requiring precise motion control.